To prepare HiPP formula, one ounce of water should be be mixed with one level scoop of dry formula. You should always partially fill your clean bottle halfway with water first. Then add your formula. Failing to do so could result in an inaccurate measurement.
Generally, one box of HIPP Organic Baby Formula will last an average of a week and a half to two weeks.
The Packaging Says I Need To Use Boiled Water?
United Kingdom labeling regulations for baby formula in are stricter than regulations in the United States. As per these regulations, HIPP is required to follow their packaging regulations even if the product is being sold elsewhere in the world.
HiPP Formula Preparation
As per the World Health Organization (WHO), parents should use water no colder than 71 degrees C to maintain product safety. There’s a minute chance that infant formula milk could have a Cronobacter Sakazakii contamination, although the odds of this occurring are very low.
HiPP baby formula milk undergoes a rigorous safety testing with higher standards that are required by law. Cronobacter Sakazakii is a bacteria can be introduced by the environment, kitchen surfaces, or through handling.
If possible, we recommend using purified, nursery, or artisan water. During the first month of life, using boiled water is highly recommended.
Avoid using plastic bottles or containers that contain BPA for any step in the preparation and feeding process.
Before feeding your baby recently prepared formula, always be sure to test the temperature first, especially if you used boiling water.
For 2,3 OZ of mixed formula use 2 OZ of boiled water and 2 spoons of formula For 3.3 OZ of mixed formula use 3 OZ of boiled water and 3 spoons of formula For 4.5 OZ of mixed formula use 4 OZ of boiled water and 4 spoons of formula For 5.7 OZ of mixed formula use 5 OZ of boiled water and 5 spoons of formula For 6.7 OZ of mixed formula use 6 OZ of boiled water and 6 spoons of formula For 7 OZ of mixed formula use 7 OZ of boiled water and 7 spoons of formula.
Since the product is from Germany, mixing instructions on the back of the package are in German. Therefore, MyOrganicCo will always send exact instruction translations along with every order.
This is what you’ll need:
A water boiler, two sterilized bottles, nipples, the closing lid, and rings, along with the formula powder and measurement spoon that come in every package.
First, wash your hands with soap to prevent infections. Boil the water to make it free of bacteria, and use only good quality drinking water.
When ready, pour the desired amount of water into one of the bottles.
Before adding the formula, cool the water in the bottle to between 104 and 122 degrees Fahrenheit.
When the water has cooled, pour 3⁄4 into the other bottle and add the formula by using the measurement spoon.
Dip the spoon into the powder and fill it lightly. You may remove any powder that spills out when over-filled with formula.
Now close the bottle using the lid and shake it until the powder is completely mixed with the water.
Then fill up with the missing 1⁄4 of your boiled water, until bottle has reached the recommended amount of mixed formula then shake again.
Wait until the temperature is right for your baby, which is around 98 degrees Fahrenheit.
You can test it on your wrist if it feels right.
Replace the lid with nipple, and your bottle is ready to be fed to your baby.
Thank you for watching our MyOrganicCo preparations guide and check us out on www.Myorganicco.com.
Hipp recommends the following water to powder measurements:
*For your convenience these instructions will also be included in your order.
For the safety of your baby the World Health Organizations recommends that you use purified or bottled water to make your formula. Though Hipp formula is manufactured under the highest standards and checked for contamination, the WHO recommends that all water be boiled prior to mixing formula to insure no bacterial contamination is present in either the water or the formula. Bottles, lids and nipples should also be appropriately sterilized.
Bring water to be used up to a rolling boil. Pour water into sterilized bottle and then cool to between 104 and 122 degrees Fahrenheit in the refrigerator.
Pour ¾ of the water into another sterilized bottle and add formula according to the above chart. For proper measurement and the health of your baby, use the spoon included with the formula. Each spoon should be filled flat and not heaping.
Close the bottle tightly and shake the powder until it is completely dissolved.
Add the remaining boiled water from the second bottle until the bottle is full to the recommended level (see chart). And shake again.
Cool the freshly made formula until it is the right temperature, usually around 98.6 degrees Fahrenheit. To prevent burns, test the formula on your forearm to make sure that it is not too hot.
To prevent spoiling: Bottles kept at room temperature should be used within 2 hours. Bottles kept in a cold pack should be used within 4 hours. Bottles kept in the refrigerator should be used within 24 hours.
To reheat premade bottles, use a bottle warmer, or heat bottle in warm water. Do not microwave bottles, as this can cause uneven pockets of scalding hot milk. Always check the formula temperature before feeding your baby.
Use all formula powder by the expiration date on the box.
The following chart is a general recommendation of how much to feed your baby:
*For best results, it is highly recommended that you follow the formula preparation instructions included with your order.